微控制器与嵌入式RISC处理器的发展现状

综述了新一代微控制器与嵌入式RISC处理器的主要特点和发展方向；详细介绍了目前国内外最流行的不同字长的系列机种、结构特点、专有特性及系统应用等；最后预测了它们的世界销售市场与国内发展前景。     

基于S-CDMA的HFC上行信道接入协议性能仿真分析

讨论了基于S－CDMA的HFC网上行信道的高效接入协议－SAMA，提出了双信道接入机制的工作原理，并对系统性能进行了分析与计算机仿真，得到一些有意义的结论。     

可编程计算器辅助测量施工放线

昌马水库工程是甘肃省重点工程，在施工中对测量放线要求较高，为了提高放线精度及效率，在放线中引入可编程序的casio fk一4500P计算器配合，迅速处理放线数据，取得了可喜的效果。     

基于B点磁探针膛内电枢电弧长度与速度分布测量的计算机控制系统的研究

基于B点磁探针的测量原理，建立了电磁轨道炮膛内三维等离子体电枢电弧长度和电弧运动速度测量的数学模型，通过对该模型的分析给出了用于测量膛内电枢电弧长度和运动速度分布的相应推论。开发了用于测量膛内等离子体电枢电弧长度和速度的多通道计算机控制诊断系统，并进行了相应的试验研究。     

智能化劳厄定向法

提出了晶体劳厄定向的智能化方法；简述了有关的Ｘ射线衍射理论、数学模型和运行步骤；讨论了该方法的可靠性和实用性．     

精馏塔静态仿真：Ⅰ.静动态混合数学模型的应用

本文为了克服精馏塔静态仿真不易收敛和初值难以给定等难题，巧妙地利用隐含数值积分方法的特点，将稳态与动态数学模型耦合起来，用以求解高难度的非理想精馏塔静态仿真问题。所得静动态混俣模型大大提高了精馏塔静态仿真的鲁棒性，对于高度非理想精馏塔的仿真尤为有效。通过对某丙烯腈萃取精馏塔的静态仿真，充分证明了这种混合模型化方法的可行性。     

Process control: An overview and personal perspective

This paper presents an overview and personnal perspective on recent developments and current practice in computer process model. The basic concepts behind conventional process control are reviewed to provide a starting point for the non-control specialist and process engineer. The ensuing sections on Internal Model Control (IMC), Model Predictive Control (MPC) and adaptive control illustrate the evolution of control technology from the traditional multiloop strategies to the modern, multivariable, model-based, computer control systems now being used in industry. The paper does not provide a complete, critical review of process control. However, the discussion and the recommended references should provide a good starting point for anyone wanting to become familiar with current practice and some of the new directions of process control.     

A survey of CSCW systems

Over the last decade, computer supported cooperative work (CSCW) has emerged as an identifiable research area that focuses on the role of the computer in group work. CSCW is a generic term which combines the understanding of the nature of group working with the enabling technologies of computer networking, systems support and applications. The paper examines the classes of system which have emerged to support cooperative working. A framework for characterising and describing CSCW systems is presented and four major classes of cooperative system identified. Each of these classes of cooperative system are examined highlighting their general characteristics and applicability to CSCW.     

异步电机性能微机测试系统设计

结合工程实际介绍了异步电机计算机辅助测试（CAT）系统的硬件、软件组成、技术方案确定以及设计原则。现场运行表明，该系统稳定可靠，且具有较高的性能价格比。     

从数字看发展片式电容器面临的机遇与挑战

采用海关进、出口统计和行业生产统计资料,通过计算、分析,用数字来说明国内发展片式多层陶瓷电容器、片式钽电解电容器、片式铝电解电容器、片式有机薄膜电容器所面临的机遇与挑战,并对其国内市场需求总量、额,国产品在国内市场占有率等做出评估,为有关单位了解片式电容器的发展提供参考,为国产产品更有效地进入国内市场、促进其发展提供依据。